|
Using Wash & Go - Dry Wash |
PDF |
| Print | |
|
Directions: Shake well before use.
|

Step 1:
Spray surface lightly with One drywash working on small areas e.g. bonnet wing, door etc. |

Step 2:
Spread with a soft cloth, allow to dry. |

Step 3:
Simply wipe off Drywash with a clean cloth. The finished surface is now washed and polished. |
|
Helpful Hints
- In very hot weather it is better to work on small areas at a time.
- Do not spray on excessive amounts of One Drywash.
- For best result use two cotton cloths, one for cleaning and one for buffing.
- One Drywash can be used under direct sunlight. However, it will dry very quickly in which case we advise that you work on smaller areas.
- When washing small areas, or near rubber trim, spray One Drywash onto the cleaning cloth then apply to the area being washed. This will avoid spraying onto black unpainted trims or on tyres.
- During washing, shake the bottle, this will keep the One Drywash well mixed and produce consistent results.
- One Drywash will remove caked on mud. More than the normal amount of the product will be needed. Shake the cloth frequently to remove any dirt that has been captured in the cloth.
- When using the cloths available through this website, use the blue cloth (microfibre towel) to apply One Drywash second blue microfibre towel for polishing off One Drywash.
- If the first/application cloth becomes dirty, shake cloth well, away from car. This will remove any collected particles/dirt.
|
|